Sometimes Windows computer displays “Application Was Unable to Start Correctly (0xc0000005)” message that stops users from running certain programs on their PC.
Application Was Unable to Start Correctly (0xc0000005)
The program was not able to start correctly (0xc0000005) Errors on the Windows computer is caused by Windows not being able to locate the appropriate software files and the appropriate settings to run a specific software application on your computer.
This error could be due to a range of reasons, which range from blocking programs caused by third-party Antivirus applications on your PC and corrupted settings or files on your computer , or faulty RAM.
Let’s go ahead and look over the steps you can take to solve this issue in your personal computer.
1. Remove RAM
If you’ve just upgraded your RAM of your PC and are now experiencing this error, it’s likely that the issue could be because of defective RAM.
The most effective method of ruling out the possibility of this happening is to take out the RAM that was recently installed and observe if the issue disappears.
Before you remove RAM, make sure that your computer’s settings are off and does not have a power Source (remove the cables). If your laptop is connected be sure that the battery is taken out.
2. Scan Computer for Malware
The next step is to ensure that your PC is not infected with malware.
If you’re using Norton Antivirus, click on the System Tray Icon > Right-click on the Norton Antivirus Icon and click on the Run QuickScan option within the contextual menu.
It is also possible to utilize the Windows Defender Offline tool to remove unsafe programs from your PC.
3. Disable Antivirus Program
The most frequent cause of “Application was unable start correctly” error message on the Windows PC is because of third-party Antivirus applications that block the application from starting.
To confirm, disable the third-party Antivirus software installed on your system and check whether this can help fix the issue.
Simply click on the System Tray Icon Click on the Right-click icon Antivirus Program icon and click on the Disable Auto Protect button.
The next screen will appear choose the time frame that you wish to deactivate the Antivirus software and click OK.
After you have disabled the Antivirus program, check whether you’re still receiving “Application was Unable to Start Correctly” error message on your PC.
4. Restore Your Computer Using System Restore
If you’ve recently made modifications to your computer, or have installed new software, you can make use of the System Restore feature in Windows 10 to reverse all recent modifications and return your computer to its original state of operation.
1. Open Control Panel on your PC.
2. On the Control Panel screen, look for the System icon and then click it (See the image below).
3. On the System screen Click on the System Protection Link (See image below)
4. If prompted, enter your Administrator Password and this will bring your through the System Restore Screen. Select Next to proceed on to the next screen.
5. On the next screen, you’ll see you will see System Restore Points as available on your computer. Choose one Restore Point that you want to use and then click Next.
Notice: After selecting a restore point, you might choose to click the Scan for affected programs to see the programs which will be removed by the restoration process.
6. You will see an indicator the fact that System Restore is taking place on your computer. When the process is complete and you are able to see a second display confirming that your system was restored with your chosen System Restore point.
After you have completed the System Restore Process is completed Your computer will then be restored to its original state that it was functioning correctly.
5. Check System Files
As previously mentioned, “Application was unable to start correctly” error could also be due to corruption of system data.
Click on Start, right-click, then select the Command Prompt Admin option in the menu that opens.
In the Command Prompt window, type SFC /scannow, then press the Enter key.
You must wait for Windows to scan for the corrupted files on your PC. If there are any issues discovered, you can utilize the DISM command to fix damaged system files on your computer. (See next step).
6. Repair System Image Using DISM
Start Command Prompt and enter Dism /Online/Cleanup-Image/RestoreHealth and press Enter. Enter key on your keyboard computer.
The DISM scan generally takes between 15 and 20 minutes. It also examines your PC for Windows component store damage and restores health.
Important: Make sure you restart your computer once the DISM scan has been completed.
Perhaps you can find one of these ways will allow you to fix the “Application was not able to start properly (0xc0000005) error” on your PC.